Crown FM CT-1 Receiver
Internal Translator Receiver
Click or read below for manual and specifications:
CT-1 Brochure (pdf)
CT-1 User Manual (pdf)
CT-1 Specifications (below)
| Frequency Range | 76 to 108MHz (this will allow the unit to work at Japanese frequencies also) |
| RF Input Connector/ Impedance | Uses a standard N connector/50 Ohms. |
| Power | DC +12 Volts DC |
| Harmonic Distortion | Stereo < 1.25% THD + Noise |
| Mono > .2% THD + Noise | |
| Stereo Separation | Better than 35dB (38dB Typical) |
|
Sensitivity |
|
| Monaural | (demodulated, de-emphasized)2 Micro V for S/N > 40dB |
| Stereo | (19kH pilot frequency added) |
| 35 Micro V for S/N >50dB (SINAD) | |
| Bandwidth and Rejection | Automatic Setting of bandwidth signal strength of desired signal |
| FM Signal to noise | 65dB, Typical 70dB |
| 1st Adjacent Channel Rejection | 66dB |
| 2nd Adjacent Channel Rejection | 73dB |
| Ambient Temperature Range | Better than 0 to 50 Degrees Celcius |
| Size | FM Receiver Module is 4.5″ x 4.5″ Mounted internally into Crown FM30-FM600 watt units |
| Weight | FM Receiver Module weighs 4 oz. Shipping Weight is 1 pound. |